Electrical Switches (Not Automot

114 found, showing page 2 of 3

*WHT SWITCH/****

Single pole switch ideal for controlling one fixture from a single location. Replaces any single pole switch. Rocker switch for smooth, quiet operation. Easy to wire. Works with tungsten, fluorescent, and resistive loads. Includes matching frame, wall plate and screws. UL (Underwriter's Laboratories) listed.

*IV SWITCH/****

Single pole switch ideal for controlling one fixture from a single location. Replaces any single pole switch. Rocker switch for smooth, quiet operation. Easy to wire. Works with tungsten, fluorescent, and resistive loads. Includes matching frame, wall plate and screws. UL (Underwriter's Laboratories) listed.

1 POLE 4-WAY SWITCH WHT

Commercial Specification Grade. 4-way long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. 15A/120/277V; 1/2HP at 120V, 2HP at 240V. Limited 10-year warranty. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) approved.

1POLE GRND SWITCH IVORY

Quiet single pole switch ideal for controlling one fixture from a single location. Framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. Side wire accepts conductors up to #12 AWG (American Wire Gauge), Quickwire accepts conductors up to #14 AWG. Features large head, hardened, triple-drive screws. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

*IV 3-WAY SWITCH****************

3-way framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. 15A/120V, 1/2 HP at 120V. Limited 2 year warranty. UL (Underwriter's Laboratories) listed. Promotional Contractor Pack.

IV 3-WAY GRND SWITCH

3-way framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. 15A/120V, 1/2 HP at 120V. Limited 2 year warranty. UL (Underwriter's Laboratories) listed. Contractor Pack.

IV OUTLET SWITCH

Heavy-duty specification grade single pole switch and grounded outlet combination. Accepts up to No. 10 conductors. Break-off fins for 2-circuit conversion. Outlet can be wired independent of or controlled by switch. Switch: 15A/120V AC. Outlet: 15A/125V. NEMA 5-15R. UL (Underwriter's Laboratories) listed.

WHT CFL/LED DIMMER CORD

Plug-in, slide switch dimmer for table or floor lamps. Also dims incandescent and halogen bulbs. 100W capacity. UL (Underwriter's Laboratories) listed.

WHT 1POLE GRND SWITCH

Illuminated single pole DECORA switch allows faster installation with Quickwire push-in and side wiring. Ideal for controlling one fixture from a single location. Works with tungsten and resistive loads. Terminal screws accept up to No. 10 copper wire. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

WHT DECORA 3-WAY SWITCH

3-way DECORA switch allows faster installation with Quickwire push-in and side wiring. Terminal screws accept up to No. 10 copper wire. 15A/120/277V, 1/2 HP-120V, 2 HP-240V. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

IV DECORA 3-WAY SWITCH

3-way DECORA switch allows faster installation with Quickwire push-in and side wiring. Terminal screws accept up to No. 10 copper wire. 15A/120/277V, 1/2 HP-120V, 2 HP-240V. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

DECORA SNGL POLE SWITCH WHT

Single pole Decora switch ideal for controlling one fixture from a single location. Allows faster installation with Quickwire push-in and side wiring. Works with tungsten, fluorescent, and resistive loads. Terminal screws accept up to No. 10 copper wire. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

DECORA SNGL POLE SWITCH IV*****

Single pole Decora switch ideal for controlling one fixture from a single location. Allows faster installation with Quickwire push-in and side wiring. Works with tungsten, fluorescent, and resistive loads. Terminal screws accept up to No. 10 copper wire. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

DEC 2SNGL POLE SWTCH PLT WHT****

2 single pole switches with matching frame, wall plate, and screws. 15A/120/277AC, 1/2 HP at 120V, 2 HP at 240V. UL (Underwriter's Laboratories) listed. White.

PUSH-BUTTON SWITCH

On/Off, for lamps, appliances (especially vacuums) and motors up to 1/3 HP. 125V AC. Single pole, single throw. 2 pre-wired 6 In. stripped leads. Maintained contact. 4A/250V; 8A/125V; 10A/125V AC. UL (Underwriter's Laboratories) listed.

HEAVY DUTY TOGGLE SWITCH

Heavy-duty, double pole, double throw, smooth action toggle switch. 6 screw-type terminals for power tools, appliances, and motors, rated up to 1-1/2 horsepower. 10A/277V AC; 20A/125V AC or 12V DC. on/off/on. UL (Underwriter's Laboratories) listed.

HEAVY DUTY TOGGLE SWITCH

Heavy-duty toggle switch ideal for household appliances and power tools. 10A (amp), 277V (volt) AC (alternating current)/ 20A, 125V AC. on/off/on. UL (Underwriter's Laboratories) listed.

HEAVY DUTY TOGGLE SWITCH

Heavy-duty toggle switch ideal for household appliances and power tools. 10A (amp), 277V (volt) AC (alternating current)/ 20A, 125V AC. on/off. UL (Underwriter's Laboratories) listed.

PUSH-BUTTON SWITCH

Momentary on, normally off. Button in-on, button out-off, for door bells, buzzers, lamps, security systems, horns, and lighting, etc. 2 screw-type terminals. 3A/240V AC; 6A/120V AC. UL (Underwriter's Laboratories) listed.

1 POLE 4-WAY SWITCH IV

Commercial Specification Grade. 4-way long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. 15A/120/277V; 1/2HP at 120V, 2HP at 240V. Limited 10-year warranty. UL (Underwriter's Laboratories) listed. CSA (Canadian Standards Association) approved.

WHT 15A TMPR CUSB OUTLET

WHT 15A TMPR CUSB OUTLET

WHT SWITCH/OUTLET

Heavy-duty specification grade single pole switch and grounded outlet combination. Accepts up to No. 10 conductors. Break-off fins for 2-circuit conversion. Outlet can be wired independent of or controlled by switch. Switch: 15A/120V AC. Outlet: 15A/125V. NEMA 5-15R. UL (Underwriter's Laboratories) listed.

WHT DUPLEX SWITCH

Heavy-duty specification grade. 2 single pole switches. Accepts up to No. 10 conductors. Break-off fins for 2-circuit conversion. Switches can be wired independent of each other or on common feed. 15A/120/277V AC; 1/2 HP-120V; 2 HP-240V. UL (Underwriter's Laboratories) listed.

WHT 3-WAY GRND SWITCH

3-way framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. 15A/120V, 1/2 HP at 120V. Limited 2 year warranty. UL (Underwriter's Laboratories) listed. Contractor Pack.

1POLE GROUND SWITCH WHITE

Quiet single pole switch ideal for controlling one fixture from a single location. Framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. Side wire accepts conductors up to #12 AWG (American Wire Gauge), Quickwire accepts conductors up to #14 AWG. Features large head, hardened, triple-drive screws. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

WHT 1POLE SWITCH****************

Quiet single pole switch ideal for controlling one fixture from a single location. Framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. Side wire accepts conductors up to #12 AWG (American Wire Gauge), Quickwire accepts conductors up to #14 AWG. Features large head, hardened, triple-drive screws. Limited 2 year warranty. UL (Underwriter's Laboratories) listed.

SWITCH ROTARY

Single pole, single throw On/Off single current rotary switch. Ideal for household lamps and appliances. 2 pre-wired 6-inch stripped leads. 1A/125VT; 3A/250V AC; 6A/125V AC. UL (Underwriter's Laboratories) listed. Carded.

SWITCH PUSHBUTTON

Single pole, single throw maintained contact push-button switch. Ideal for household appliances, various lamps, and lighting fixtures. 2 pre-wired 6 In. stripped leads. 3A/250V AC; 3A/125VT; 6A/125V AC; 6A/125VL. UL (Underwriter's Laboratories) listed.

1-POLE SWITCH CMMRCL WHT***

Single pole switch ideal for controlling one fixture from a single location. Commercial specification grade. Applications include municipal facilities, government buildings, malls, department stores, hospitals, office buildings, schools, and more. Long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

WHT 3-WAY GRND SWITCH**

Commerical Specification Grade. Long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. 15A/120/277V; 1/2 HP at 120V, 2 HP at 240V. 3-way. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

BRN SURFACE MOUNT SWITCH

Surface mounted T-rated toggle switch. Ideal for use with 2 or 3-wire, No. 12 or 14 non-metallic sheathed cable. Bus bar for feed-through connections. Knockouts for back, knob, or tube wiring. (2) No. 8 wood screws included. Single pole. 10A/125V, 5A/250V. UL (Underwriter's Laboratories) listed.

IV 1-POLE GRND SWITCH

Single pole switch ideal for controlling one fixture from a single location. Commercial specification grade. Applications include municipal facilities, government buildings, malls, department stores, hospitals, office buildings, schools, and more. Long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

WHT 1POLE GRND SWITCH

Single pole switch ideal for controlling one fixture from a single location. Commercial specification grade. Applications include municipal facilities, government buildings, malls, department stores, hospitals, office buildings, schools, and more. Long-life toggle switch with captive mounting screws for fast installation. Large-head terminal screws backed out and staked for fast side wiring of up to No. 10 copper wire. Heavy-gauge rust-resistant steel mounting strap, break-off plaster ears for best alignment. Large silver-cadmium oxide contacts insure long life. Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

IV 1 TOGGLE WALL PLATE

Stamped steel toggle switch wall plate. Individually packaged in clear utility plastic. Ideal for professional customers. UL (Underwriter's Laboratories) listed.

IV DUPLEX SWITCH

Heavy-duty specification grade. 2 single pole switches. Accepts up to No. 10 conductors. Break-off fins for 2-circuit conversion. Switches can be wired independent of each other or on common feed. 15A/120/277V AC; 1/2 HP-120V; 2 HP-240V. UL (Underwriter's Laboratories) listed.

$12.99
SWITCH/OUTLET

Single pole switch and a 2-pole, 3-wire grounded outlet in a single gang space. Switch: 15A/120V, 1/2 HP-120V. Outlet: 15A/125V, NEMA 5-15. Limited 10-year warranty. UL (Underwriter's Laboratories) listed.

DECORA 2-SGL POLE SWITCH IV**

Install 2 single pole switches in a single gang space. 15A/120/277V, 1/2 HP-120V, 2 HP-240V. (The total combined load for both switches must not exceed 20A.) Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

WHT DUPLEX SWITCH

Install 2 single pole switches in a single gang space. 15A/120/277V, 1/2 HP-120V, 2 HP-240V. (The total combined load for both switches must not exceed 20A.) Limited 10 year warranty. UL (Underwriter's Laboratories) listed.

6PK WHT 3-WAY SWITCH

3-way framed toggle switch allows faster installation with combination side and Quickwire push-in wiring. 15A/120V, 1/2HP at 120V. Limited 2-year warranty. UL (Underwriter's Laboratories) listed.

IVORY DUPLEX SWITCH

Commercial Specification Grade. Combination single pole and 3-way switch. Side wired. Break-off fins for conversion to separate feeds. Accepts up to No. 10 copper/copper clad wire. Silver cadmium oxide contacts. Fits standard duplex wall plate. 10 year warranty. 15A/120/277V AC. 1/2 HP at 120V, 2 HP at 240V. UL (Underwriter's Laboratories) and CSA (Canadian Standards Association) listed.

Page